Hardware

What Is An Axial Flux Motor And Why Is It Better?

Picture of an axial flux motor

What is an Axial Flux Motor?   To skip to the patent data click here. An axial flux motor is an electromagnet based motor technology that uses pulses of electromagnetic charge to create a rotating force .  Axial flux motors are great because they avoid the use of a drive-train altogether. The problem with a drive-train is that it includes a drive-shaft, crankshaft, propeller shaft, and transmission (gearbox).  These components connect together and when working use the kinetic pressure between themselves to transfer power as torque.  However, the connections cause friction and  this friction between components results in a loss of energy.  If you look at the image of the gearbox below, you can see how complex and exact the contact surfaces are, but there is still energy loss at each of those contact points.       A traditional automotive drive-train is inefficient due to the transfer of kinetic…

Read more

Commercially Viable Nuclear Fusion Is Closer Than Ever

Engineering 3D model of a TOKAMAK thermal nuclear fusion engine

The Goal of Reducing Climate Change The OECD advisory on climate change (Green Grown Studies) states that a multi-pronged approach is required to reduce, stop, or reverse climate change. The critical stages in the energy lifecycle that need to be addressed include: Energy generation Transportation Conversion Storage Consumption Smart-grid technology Smart-homes Smart Manufacturing Smart circuits and computer chips Of all the green / renewable sources of power, nuclear fusion has the biggest potential impact. Nuclear fusion is the holy grail of renewable green energy sources and has the potential to drastically reduce CO2 output by replacing other fossil fuels such as coal-fired electricity plants. Other potential sources of renewable power such as solar, wind, geothermal, and hydro offer benefits over non-renewable power such as coal, and oil and gas, but none have the potential to output as much clean energy as realizing commercial of nuclear fusion.  However, a future global…

Read more

3D Printing Solutions for COVID-19

A serious potential drawback of the just-in-time economy (JIT) is that when the demand for critical supplies increase sharply, that supply is not immediately available, which in the current corporate cluster-fuck known as COVID-19 leaves our front-line health care staff with a broomstick jammed so far up their arse that you can follow them around like Hansel and Grettel from the ass blood they are hemorrhaging down onto the floor they walk on. Personal protective equipment (PEE) is critical to public health-care staff and sadly many of these hero’s lives have already been lost during the ongoing COVID-19 crisis due to supply chain short comings. In some ways, 3D printing has proven itself to be more agile during this crisis.  For one, the 3D printer allows production of a wider array of products than any other single device.  For example, during the COVID-19 outbreak, 3D printing companies were immediately able…

Read more

Enjoy Android apps on Chromebooks?

Digitimes research Group has posted their forecast for chrome books in 2014. According to their expectations chrome book sales going strengthen in the next few years. James Kendrick at ZDNet also reported his expectation that chrome books will be able to use android apps back in January 2013. This is exciting proposition and not only completely logical but I would expect that chrome book sales completely depend on their ability to use android apps. Obviously the number of android apps, is high and help android smartphone due to network effects. Although a lot of your Java code can be reused if you’re to just repackage your app for Chrome OS, number of available apps on Chrome OS could instantly multiply without increasing developer workload. I think the experience of running an android app on Chrome OS would be suitable for the user, and would instantly increase the chrome OS network…

Read more

A final word about the CNT disruption

In order to assess the ability to respond to the disruption of CNT technology, I have prepared a box score for vulnerability to potential disruptive threat assessment below. The resulting conclusion is that costs are the biggest factor affecting the semiconductor industries ability to react. As mentioned in question 1, the high costs associated with R&D and manufacturing in the semiconductor industry means that current facilities need to be planned well ahead of time. Uncertainty, risk, and complexity also make semiconductor road mapping tricky business. Box Score for vulnerability to disruptive technology threat – Semiconductor Manufacturing Firms Denial – 0 History – 0 Resistance to Change – 0 Mind Set – 0 Brand – 0 Sunk Costs – 10 Profitability – 10 Lack of Imagination – 0 The factors I will discuss therefore are: (1) costs and (2) uncertainty. Sunk costs problem implies that firms will not want to migrate…

Read more

More about the CNT Disruption

The industry I have chosen to investigate, and claim will be a big disruption in the future – although it isn’t poised for market yet – is the carbon nanotube (CNT) processor. Carbon nano technology was highlighted as a disruptive technology in a May 2013 report from McKinsey Quarterly (Manyika, 2013). The reason I believe it will be disruptive is because carbon nano processors have the potential to be much more energy efficient and compact (per processing capacity) than silicon based transistors. The infamous Moore’s Law has accurately predicted the improvements of silicon based semiconductor technology since it was stated by Moore in 1965 (Moore, 1965). While 9nm silicon chips are manufactured today, the the inherent quantum limitations posed by silicon-based semiconductor technology threaten to cause the development pace to drop below Moore’s expected level of improvement by 2020 at the 7nm scale (Merritt, 2013). On the other hand, a…

Read more

In order to ‘catch the wave’ of CNT technology, firms in the semiconductor industry will need to morph their business model to accommodate competition and new opportunities. The reason that I say “morph” the business model, instead of radically change it, is because the shift to CNT from silicon is not here yet, it is a long process forthcoming, and the shift will entail many years of extensive forecasting and planning. The stakes are high for semiconductor developers and manufacturers, so a careful balance between maintaining strong revenue streams, and investing it into R&D is more realistic strategy than a ‘flip the switch’ type of strategy. Although it is less likely that a new player will suddenly emerge onto the field and eat lunches (like Netflix is doing in online media) because of the high barrier to entry, patent activity should be carefully monitored and assessed to judge the relative…

Read more

Why Netflix has kicked ass

I propose three main reasons for Netflix rapid growth: (1) broad device and software architecture support, (2) contracts with top content producers, and (3) optimal timing with respect to scaling, product deployment and technology road mapping. I will outline the ways these three factors have contributed to Netflix growth below. 1. Broad device and software architecture support Netlflix supports a huge range of devices and operating systems. The astounding list includes: Windows and OSX, , ChromeOS, iOS, Android, and Windows Phone, Amazon Kindle, and Nook, which pretty much rounds out the entire PC, notebook, smartphone, and tablet markets. Netflix was also able to secure streaming capabilities in a wide array of Blue-ray players, and smart TV’s and set-top-boxes. Once you include XBox, Playstation, Nintendo Wii, 3D, WiiU, TiVO and Boxee, it’s hard to find a digital device that doesn’t support Netflix. Forbes reports that Playstation is the most used device…

Read more

What are the big TV networks scared of most?

Major TV networks in several cases have been acquired by or merged with cable providers. Their business model is heavily integrated with cable and internet service. With respect to internet technology, their biggest fear may be the realization of a technology race coined “The Last Mile” (Cordeiro, 2003). The goal of ‘the last mile’ is for telecoms to deliver broadband wireless internet to homes. Intel had plans to help make that happen with WiMax but luckily for ISP’s have come up short so far. If telecoms were to successfully develop a superior last mile solution, consumers may switch from Comcast or AOL cable internet to Verizon or AT&T. So, wireless broadband is a potentially disruptive technology for cable service providers (Goodwins, 2005; The Economist 2002). With respect to online video content being a disruptive technology, TV networks biggest fear may that global broadband penetration, significant improvements in broadband speeds and…

Read more

Hon Hai Accumulating Intelligent Auto Patents

Luxgen is a new Taiwanese independent auto brand seeking to grow and add market share in Taiwan and abroad. Luxgen has shown propensity towards selling intelligent automobiles in a global market. More broadly, in the US autonomous vehicles have been licensed for testing in two US states to date, and Google’s Sergey Brin has publicly predicted that autonomous vehicles will be ready for market in 5 years. Luxgen is owned by parent company Hon Hai Precision Industry Ltd. Hon Hai has started to accumulate patents related to autonomous vehicles starting in 2010 and their transportation related patent awards and their details are below in Figure 2 and Table 4. Secondly, top litigated software UPC classes for 2012 include several classes related to transportation technology. These litigation trends indicate that technological innovation in the transportation industry is high-value at this time. Figure: Hon Hai Transportation Related Patent Grants by Award Year…

Read more